Advanced Micro Lites - L-100XXC-TR


	SURFACE MOUNT LED L-955XC SERIES 3.4x2.8mm Surface Mount LED

Selection Guide and Application Information (Ratings at 25°C Ambient)

Part No.	Chip		Lens Color	Wave Length p(nm)	Absolute Maximum Ratings				Electro-Optical Characteristics					View Angle (deg.)
	Raw Material	Emitted Color			nm	Pd mW	If mA	If (Peak)	Vf(V)			If	Iv (med)
	Raw Material	Emitted Color			nm	Pd mW	If mA	If (Peak)	Min.	Typ.	Max.	(Rec)	Typ.
L-955HC	GaP	Bright Red	Water Clear	700	90	45	15	50	1.7	2.1	2.8	20	4.2	120
L-955EC	GaAsP/GaP	Hi-Eff. Red	Water Clear	635	45	100	30	150	1.7	2.0	2.8	20	14.5	120
L-955EC-610	GaAsP/GaP	Orange	Water Clear	610	45	100	30	150	1.7	2.0	2.8	20	14.5	120
L-955UEC-E	AlInGaP	Red	Water Clear	635	30	100	30	150		2.0	2.6	20	65.0	120
L-955GC	GaP	Green	Water Clear	565	30	100	30	150	1.7	2.1	2.8	20	18.0	120
L-955SGC	GaP	Hi-Eff. Green	Water Clear	568	30	100	30	150	2.2	2.1	2.6	20	25.0	120
L-955UGC	GaP	Hi-Eff. Green	Water Clear	568	30	100	30	150	2.2	2.1	2.6	20	35.0	120
L-955YC	GaAsp/GaP	Yellow	Water Clear	585	30	100	30	150	1.7	2.1	2.8	20	12.5	120
L-955UYC	AlInGaP	Yellow	Water Clear	588	30	100	30	150		2.0	2.6	20	72.0	120
L-955UYC-E	AlInGaP	Yellow	Water Clear	592	30	100	30	150		2.0	2.6	20	53.0	120
L-955SRC	GaAlAs	Super Red	Water Clear	660	20	60	20	150	1.6	1.8	2.1	20	54.0	120
L-955LRC	GaAlAs	Super Red	Water Clear	660	20	60	20	150	1.6	1.8	2.1	20	65.0	120
L-955URC	GaAlAs	Super Red	Water Clear	660	20	60	20	150	1.6	1.8	2.1	20	75.0	120
L-955URC-RP	GaAlAs	Super Red	Water Clear	660	20	60	20	150	1.6	1.8	2.1	20	75.0	120

Absolute Maximum Rating: (Ta=25°C)

Reverse Voltage	5 Volt
Reverse Current (Vr=5V)	10 ∞A
Operating Temperature Range	-40°C to +80°C
Storage Temperature Range	-40°C to +100°C
Lead Soldering Temperature Preheating Temperature	240 ~ 250°C for 5 seconds 100 ~ 150°C for 2 minutes

Absolute Maximum Rating: (Ta=25°C)

Para Meter Description	Symbol	Unit
Spectral Line Half-Width	- σ	nm
Power Dissipation	Pd	mW
Peak Forward Current (Duty 1/10@KHz)	If(peak)	mA
Recommended Operation Current	If (Rec)	mA
Average Luminuous Intensity (If=10mA)	Iv	mcd

Notes:

All Dimensions are in millimeters (inches).
Tolerance is +/- 0.25mm (0.10") unless otherwise specified.
Protruded resin under flange is 1.5mm (0.059") max.
Lead spacing is measured where the leads emerge from the package.
Specifications are subject to change without notice.

Home | LEDs | Incandescents | Customized Lights
FAA Approved Lights | Service | About Us | Contact Us