STANDARD 5MM LED LAMP
Standard LED

Selection Guide and Application Information (Ratings at 25°C Ambient)

Part No. Chip Lens Color Wave Length (nm) Absolute Maximum Ratings Electro-Optical Characteristics View Angle (deg)
Raw Material Emitted Color nm Pd mW If mA If (Peak) Vf(V) If Iv (med)
Min. Typ. Max. (Rec) Min. Typ.
L-513HC GaP Bright Red Water Clear 700 90 45 15 50 1.7 2.1 2.8 5~10 8 20 30
L-513EC GaAsP/
GaP 		Hi. Effi Red Water Clear 635 45 100 30 160 1.7 2 2.8 10~20 20 60 30
L-513GC GaP Green Water Clear 565 30 100 30 160 1.7 2.1 2.8 10~20 10 30 30
L-513SGC GaP Green Water Clear 565 30 100 30 160 1.7 2.1 2.8 10~20 30 100 30
L-513LGC GaP Green Water Clear 565 30 100 30 160 1.7 2.1 2.8 10~20 100 250 30
L-513UGC GaP Green Water Clear 565 30 100 30 160 1.7 2.1 2.8 10~20 250 500 30
L-513YC GaAsP/
GaP 		Yellow Water Clear 585 30 100 30 160 1.7 2.1 2.8 10~20 10 30 30
L-513SYC GaAsP/
GaP 		Yellow Water Clear 585 30 100 30 160 1.7 2.1 2.8 10~20 30 100 30
L-513LYC GaAsP/
GaP 		Yellow Water Clear 585 30 100 30 160 1.7 2.1 2.8 10~20 100 250 30
L-513IC GaAlAs Hi. Eff Red Water Clear 625 20 60 20 160 1.6 1.8 2.1 10~20 60 300 30
L-513SRC GaAlAs Super Red Water Clear 660 20 60 20 160 1.6 1.8 2.1 10~20 300 1000 30
L-513LRC GaAlAs Super Red Water Clear 660 20 60 20 160 1.6 1.8 2.1 10~20 1000 2000 30
L-513URC GaAlAs Super Red Water Clear 660 20 60 20 160 1.6 1.8 2.1 10~20 2000 3000 30

Absolute Maximum Rating: (Ta=25°C)
Reverse Voltage 5 Volt
Reverse Current (Vr=5V) 10μA
Operating Temperature Range -40°C to +80°C
Storage Temperature Range -40°C to +100°C
Lead Soldering Temperature 260°C for 5 seconds
Electro-Optical Characteristics (Ta=25°C)
Para Meter Description Symbol Unit
Spectral Line Half-Width λ nm
Power Dissipation Pd mW
Peak Forward Current
(Duty 1/10@KHz)		 If(peak) mA
Recommended Operation Current If (Rec) mA
Average Luminuous Intensity
(If=10mA)		 Iv med

Notes:
  1. All Dimensions are in millimeters (inches).
  2. Tolerance is +/- 0.25mm (0.10") unless otherwise specified.
  3. Protruded resin under flange is 1.5mm (0.059") max.
  4. Lead spacing is measured where the leads emerge from the package.
  5. Specifications are subject to change without notice.
Home  |   LEDs  |   Incandescents  |   Customized Lights
FAA Approved Lights  |   Service  |   About Us  |   Contact Us